Device & Equipment

Yes, you can find all important information around the hoogo S4 as well as problem solutions in the handling manual.

First, hold the wall mount where you want it to be and mark two holes at the mounting points. Now drill at the two marked locations and insert the supplied dowels into the holes. Now you can fasten the wall mount with the screws in the dowels.

To mount the handle, simply insert it into the upper end of the suction tube until you hear and feel it click into place.

Press the lower detent on the suction pipe to put on the floor nozzle and let it click into place.

Press the lower lock on the suction tube to first unlock the floor nozzle. Pull the floor nozzle off the suction pipe and loosen the attachment of the roller on the side of the floor nozzle. If this does not come off, you can use a coin to help. Now you can remove the brush roller and replace it with another one. To reinsert, close the locks again and place the floor nozzle on the lower end of the suction pipe.

In addition to the floor nozzle, the hoogo S4 comes with a motorized upholstery and mite nozzle, a crevice nozzle and a combined upholstery and mite nozzle. By releasing the lower lock on the suction tube, you can easily replace the nozzles and securely reattach them by snapping them into place.

You can buy equipment and accessories in our hoogo shop.

Shortly, you will be able to find an adapter to use the flip flop nozzle with the hoogo S4 in our shop. When combining the hoogo S4 with the flip flop nozzle, you should use medium or highest suction power.