Device & Equipment S5+

Yes, you can find all important information about the hoogo S5+ as well as solutions to problems in the operating instructions.

To mount the wall mount, first hold the wall mount at the desired location and mark two holes at the mounting points. Drill holes at the two marked locations and insert the supplied dowels into the holes. Now you can fix the wall mount with the screws in the dowels.

To mount the handset, simply insert it into the upper end of the suction tube until you hear and feel it click into place.

Press the lower lock on the suction tube to attach the floor nozzle and snap it into place.

Press the lower lock on the suction tube to unlock the floor nozzle first. Pull the floor nozzle off the suction tube and loosen the attachment of the roller on the side of the floor nozzle. If this does not come off, you can help yourself with a coin. Now remove the brush roller and replace it with another one. To replace it close the locks again and place the floor nozzle on the lower end of the suction tube.

In addition to the floor nozzle, a motorized upholstery and dust mite brush, a crevice nozzle and a combined upholstery and furniture tool are included with the hoogo S5+. You can easily replace the nozzles by loosening the lower lock on the suction tube and securely reattach them by snapping them back into place.

You can buy accessories in our hoogo Shop.

You can use the hoogo S5+ together with the flipflop nozzle. Simply connect our AD 16 adapter and get started. When using the nozzle, you should use the S5+ on medium or highest power level.